Bidets are becoming increasingly popular as a hygienic alternative to traditional toilet paper. Not only do bidets offer a more thorough cleaning experience, but they also help reduce environmental waste.

However, like any bathroom fixture, bidets require regular cleaning to maintain their effectiveness and keep them sanitary. In this article, we will guide you through the easy and effective process of cleaning a bidet.

Gather the necessary supplies

Before you begin cleaning your bidet, gather the following supplies:

? Rubber gloves
? Mild soap or bidet-specific cleaning solution
? Clean, lint-free cloth or microfiber towel
? Soft-bristle brush (optional)
? White vinegar (optional)

Turn off the water supply

Locate the shut-off valve connected to your bidet’s water supply and turn it off. This step is crucial to avoid any accidental splashing or spraying during the cleaning process.

Clean the exterior

Wearing rubber gloves, dampen a cloth or microfiber towel with mild soap and water or a bidet-specific cleaning solution. Gently wipe down the exterior surfaces of the bidet, including the control panel, nozzle, and any other accessible parts.

If you encounter stubborn stains or residues, you can use a soft-bristle brush to scrub the surface gently. Be sure to avoid using abrasive cleaners or scrubbing pads that could scratch the bidet’s finish.

how to clean bidet

Clean the nozzle

The nozzle is the most critical part of a bidet and requires thorough cleaning. Start by referring to your bidet’s user manual for specific instructions on nozzle removal, if applicable.

Some bidets have self-cleaning or retractable nozzles that make this process easier. If the nozzle is removable, detach it carefully according to the manufacturer’s instructions.

Once removed, rinse the nozzle with warm water to remove any debris. If you notice any mineral deposits or limescale buildup, soak the nozzle in a mixture of warm water and white vinegar for about 30 minutes.

how to fix bidet leakage

After soaking, gently scrub the nozzle with a soft-bristle brush to remove any remaining deposits. Rinse the nozzle thoroughly with water to remove any vinegar residue.

Note: We have a detailed blog on how to clean a bidet nozzle, check this blog for more detailed information.


Reassemble and test

Once the nozzle is clean and dry, reattach it to the bidet following the manufacturer’s instructions.

Turn on the water supply and test the bidet to ensure that the water flow and pressure are functioning correctly. Adjust any settings as needed.

FAQs about Cleaning a Bidet

How often should I clean my bidet?

It is recommended to clean your bidet at least once a week to maintain hygiene. However, the frequency may vary depending on personal usage and preferences.

Can I use regular bathroom cleaners to clean my bidet?

It is generally recommended to avoid using harsh chemicals or abrasive cleaners on your bidet, as they may damage the finish or components. Instead, opt for mild soap and water or bidet-specific cleaning solutions.

What if my bidet has a built-in air dryer? How do I clean it?

If your bidet has a built-in air dryer, refer to the user manual for specific instructions on cleaning and maintenance. Some bidets with air dryers may have removable filters or trays that require periodic cleaning.

Is it necessary to clean the bidet nozzle every time?

While it is not necessary to clean the bidet nozzle after every use, it is still recommended to include nozzle cleaning as part of your regular maintenance routine. Regular cleaning helps prevent the buildup of bacteria or mineral deposits.

Can I use bleach to clean my bidet?

It is best to avoid using bleach or other harsh chemicals on your bidet, as they can damage the materials and components. Stick to mild soap, water, and bidet-specific cleaning solutions for safe and effective cleaning.

Are there any additional steps for cleaning a bidet with warm water?

If your bidet has a warm water feature, the cleaning process remains largely the same. However, before cleaning the nozzle, make sure to turn off the warm water supply and allow the bidet to cool down. Once cooled, you can follow the steps outlined earlier to clean the bidet and its nozzle.


How can I prevent mineral deposits or limescale buildup in my bidet?

To prevent mineral deposits or limescale buildup in your bidet, you can periodically clean the nozzle with a mixture of warm water and white vinegar. Additionally, if your area has hard water, consider using a water softener or installing a water filter to reduce mineral content.

Can I use a pressure washer or high-pressure water to clean my bidet?

It is not recommended to use a pressure washer or high-pressure water to clean your bidet, as it can damage the bidet’s components or cause leaks. Stick to gentle cleaning methods using mild soap, water, and soft-bristle brushes.

Is it necessary to clean the bidet if I use toilet paper in addition to the bidet?

Yes, it is still important to clean the bidet regularly, even if you use toilet paper alongside it. Cleaning the bidet ensures its proper functioning and maintains a hygienic environment in your bathroom.

By following these simple steps and incorporating regular cleaning into your bidet maintenance routine, you can keep your bidet clean, hygienic, and functioning optimally. Enjoy the benefits of a fresh and eco-friendly cleansing experience with a clean bidet.